"Stop wasting money on factory A-arms for your Liberty."

"Al's A-arms will give you a life time of durability."

Dear Friend,

If you'd like replaceable ball joints, grease able ball joints, heavy duty construction and welded by certified welders, then this might be the most important web page you'll ever read.

Here's why:

At Jeepinbyal (JBA) we make better upper control arms (UCA) or A-arms than Chrysler.

Now, I know you're probably skeptical. That's normal and healthy. Let me give you three good reasons we can back up what we claim:

Three Reasons To Believe What I Say

Reason one: Al Handy designed and built the first set of upper control arms (UCA) or a-arms in 2003! JBA first generation a-arms were born, we are now making the gen 4.5 our best design to date. There are hundreds of Jeepin by Al's a-arms in service all over the word.

Reason two: I have been designing and fabricating custom product for over 20 years.

Reason three: Jeepin by Als a-arms are approver by All J Products, Rocklizards Fabrication and Jeff Daniels Jeep Customizing.

Here is a summary of the
benefits you receive with Al's upper control arms!

Now, you're probably wondering how and why we can do all those things.

Let me explain.

The Jeepin' By Al Upper A-Arms were designed for your lifted Liberty and will directly replace your stock upper control a-arms. The original equipment a-arm hits the spring, which causes premature ball joint failure on Liberty's with a lift kit. The Jeepin' By Al A-Arms are compatible with all the lift kits on the market today! These A-Arms were designed to fit on 2002 through 2007 Jeep Liberty's. Made of heavy duty tubing, red powder coat finish, with Moog replaceable ball joints and factory rubber bushings. The A arms are assembled and ready to bolt onto your Liberty. Sold as a set, 1 left & 1 right upper control arm (UCA).

Don't take my word for it.
Listen to what our customers say.

Testimonial: JeepinAl, Just wanted to let you guys know I received the KJ upper control arms and put them on today. The arms installed fairly easy as I was expecting it to be an all day project. All contact I previously experienced with the ball joint/strut is gone now. Your Gen 4.5 arms have solved the problem I have lived with for a long time. I installed the lift shortly after buying my KJ new back in 02. The noise from the contact issue was very noticeable from the beginning. After having that issue I was concerned about even buying any other aftermarket products for the Jeep, including yours. Problem was once the lift and tires were on the vehicle there was no way I would be removing them, it just looked way too nice. Besides I have yet to see any other lifted Liberty's where I live. Your arms have taken away the concern I have had about imminent ball joint failure from being a reality. I just wanted to thank you for a making a great product that worked great for me. James Parker Newark, OH

Testimonial: They've held up great to all the wheeling I've done on them since they were installed at All-Js on May 24 2008. The arms have held up to Hell's Revenge, Fins $ Things, Porcupine Rim, Lockhart Basin/Hurrah Pass, Long Canyon Road and the White Rim Trail in Canyonlands National Park. Not to mention Big Eye Mine Road, a local trail here in Yuma, AZ. I think they've had nearly the same off-road miles as on-road miles since being installed. With these arms matched up with the Frankenlift Premium II kit, it makes a KJ feel like a street car in ride feel, but WAY more capable off-road. I love it!!! Thanks for a great product!!! Regards, Scott

Warning: Do NOT buy upper A-arms for 02'-07' lifted Jeep Liberty's
unless it meets the following criteria

There is a lot of confusion surrounding our field. I want to give you 5 criteria or elements you absolutely, positively must have in any solution you obtain:

1: Gives you strut clearance!

2: Replaceable ball joints!

3: Factory front wheel alignment!

4: Durability for off road use!

5: Bolts in the factory pockets in short order!

6: You will never need to replace your upper A-arms for the life of your KJ

Chrysler's factory control A-arms vs Al's upper a-arms,  3/8" [9.5mm] More Spring Clearance!

No tire rubbing with Al's Gen 4.5 A-arms!

You get at least 10 times your money's worth!

I have over $10,000.00 of R&D work into the gen 4.5 upper control arms. I spent month testing different ideas. For a fraction of time and cost you can have a set of JBA a-arms that will out last the factory a-arms 5 to 1.

In summary, here's what you get:

Installation instructions, One set of Als a-arms, 2 moog ball joints, 4 mounting bushings, A-arms are full assembled and ready to bolt on your Jeep KJ.

If you respond right away, you pay only $395.95 $385.95 plus shipping.

Act immediately and receive the following bonus

-You get instructions on how to get the most out of your front suspension.

Since I know it's 100% to your benefit to act right away, I want to sweeten the pot and give you every possible reason to say YES today! If you respond immediately, you'll also receive the following:

You can't lose with our 100%,
ironclad, money back guarantee

By the way, the bonus is yours to keep even in the unlikely event you decide to take advantage of our ironclad money back guarantee:

Your satisfaction is guaranteed with our 100%, no-questions-asked, iron-clad money-back guarantee. If you aren't absolutely thrilled with our product, just contact us (or send the product back) within 6 months and we'll refund 100% of your purchase price. No questions asked!

Here's how to order right now!

 NEW!  To order Al's Upper A-arms for 02'-07' stock Jeep Liberty just click the button below  NEW!

Order factory style arms Now!

To order Als Upper A-arms for 02'-07' lifted Jeep Liberty just click the button below

with a lift kit - Order Now! - with a lift kit

Place order before 2:00 pm ET and your arms will ship the same day!

Shipping world wide w/ UPS & USPS!

Ship next day air for the emergency repair on your daily driver!

keep on Jeepin,

Marlin Gehman

owner

Jeepin By Al LLC.